The Visitor Management module in Securly Pass allows schools to run instant background checks on guests entering campus. Use the following guide to prepare your setup.

What you’ll need:

Securly Pass
Desktop/Laptop
iPad(s) or Android tablet(s)
Device stand for tablet (if desired)
Badge printer (if desired)

Compatible Kiosk Devices	Compatible Printers	Compatible Label Rolls

iPad

Current iOS plus the two most recent versions.

Android Tablet

Android 8.0 or higher

Brother QL-820NWB Desktop Label Printer
Dymo LabelWriter 450 Turbo
Dymo LabelWriter 450
Dymo LabelWriter 550 Turbo

Brother DK-1202 Labels - 2.4 in x 3.9 in (62 mm x 100 mm)

DYMO LabelWriter Labels - 2-1/4 in x 4 in (57mm x 102mm)

Additional Notes

Brother Printers

Require Brother DK-1202 printer labels
Connect only on 2.4 GHz WiFi networks, cannot connect to 5 GHz bands
Works directly with the tablet wirelessly
Require the Brother iPrint&Label app

DYMO Printers

Require DYMO 2-1/4 in x 4 in (57mm x 102mm) labels
Must be connected to a computer
Badge printing must be enabled under: Kiosk Settings → DYMO printer → Visitor self serve badge printing

Detailed step-by-step printer setup instructions are located within Securly Pass.

Go to: Training → Documents → Pass → Visitor Admin Guide → Setup and Management of Kiosks.

Clarification on Dymo Printer Compatibility:

The Dymo LabelWriter 550 is not compatible with the Securly Visitor Management System. However, the Dymo LabelWriter 550 Turbo is supported and can be used to print visitor badges effectively.

Visitor Management Module - Technical Compatibility Guidelines